Mircom TX3 Series - Keypad Navigation; Exiting Configuration Mode; Figure 3. Keypad Navigation

14 (42) Telephone Access System User Guide Version 1.1
LT-968 Copyright 2012
Configuration
2.5 Keypad Navigation
The diagram below shows how to use the keypad when in CONFIGURATION
MODE.
Figure 3. Keypad Navigation
2.6 Exiting Configuration Mode
To exit configuration mode
1. Press info key to “Exit”.
In configuration
mode
Press to move
left.
*
In configuration
mode
Press to scroll up
Press to scroll
down.
Press to cancel
the selection or exit
Press to enter
and confirm selection.
Press to move right for checking and un-checking
the check box
#
Configuration Menu
1. System Option