Configuration
Version 1.1 Telephone Access System User Guide 20 (42)
LT-968 Copyright 2012
2.13 Auxiliary Door Timer Setup
The auxiliary door timer defines the length of time the auxiliary door stays
unlocked.
To set up the auxiliary door
Figure 9. Auxiliary Door Timer Setup
You have successfully set up the auxiliary door timer. The display now returns to
the configuration menu.
2.14 Changing Your Passcode
To change your passcode, you must be in configuration Mode. Refer to
Entering configuration Mode on page 13 for instructions.
Note: The default passcode for level 3 is 3333. The default passcode for
level 2 is 2222. Passcode level 1 is not used currently.
1. Press (scroll up) or (scroll down) to
find “Door Timer”.
2. Press when the arrow is beside “Aux Door
Timer”. You enter Aux Door Timer setup.
3. Use the arrow keys to find a time duration between
1 and 60 seconds. Press to select.
The factory default is 30 seconds.
4. Press to save and continue.
To Next Page
Loading...
