Mircom TX3 Series - Setting the Talk and Door Timers; Talk Timer Setup; Figure 7. Talk Timer Setup

18 (42) Telephone Access System User Guide Version 1.1
LT-968 Copyright 2012
Configuration
2.10 Setting the Talk and Door Timers
To set the talk time and door timers, you must be in Configuration Mode. Refer
to Entering Configuration Mode on page 13 for instructions.
2.11 Talk Timer setup
The talk timer defines the maximum length of time that a visitor speaks with a
resident.
To set up the talk timer
Figure 7. Talk Timer Setup
You have successfully set up the on-line timer. The display now returns to the
configuration menu.
1. Select Configuration Menu, System Option.
2. Press (scroll up) or (scroll down) to
find “Talk Timer”.
3. Press when the arrow is beside “Talk
Timer”. The display enters Talk Timer setup.
4. Enter time duration between 10 to 300 seconds.
The factory default is 60 seconds.
5. Use the up down arrows to change value.
6. Press to save and continue.
6. Aux door Timer
7. Talk Timer
Talk Timer
[ 060 ]