28 (42) Telephone Access System User Guide Version 1.1
LT-968 Copyright 2012
Configuration
2. Use the up arrow to move from number of residents in increments of 5 to
the desired number. The maximum depends on the TX3 Model (it can be
200, 1000 or 2000).
Note: Only 200 names can be added at a time.
3. Press the telephone (enter) key to accept. The next screen will ask for
resident name. Enter one of the resident names using the alphanumeric
keypad.
4. Press the telephone (enter) key to accept. The next screen will ask for the
resident’s dial code. All the rest of the dial codes increase by one.
5. Use the number keypad to enter the start dial code. The next screen asks
for the resident’s keyless code. All the rest of the keyless code increase by
one.
6. Use the number keypad to enter the start keyless code. The next screen
asks which audio line to use.
7. Use the up arrow to enter the line number. Press the enter (telephone) key
to enter.
8. Use the up arrow to enter the line number. Press the enter (telephone) key
to enter. The next screen asks for the relay code.
9. Press info key to return to previous menu. View the residents entered by
scrolling page up and down using the * and # keys. To enter the proper
resident names, use the edit feature.
To Next Page
Loading...
