Menu Structure
43
/debug - the command line debugger is in here.
/global - the 'built-in' commands are stored in this scope, and are always accessible.
Complete Menu Tree Summary
These are the commands available in each scope for reference. Most of these commands are
detailed later in the document, except for commands in the 'module' and 'debug' scopes. The
contents of 'module' are likely to change depending on the hardware fitted to the gateway boards
and the software driver modules loaded to support it. The 'debug' scope gives access to the
system debugger and qualifies for its own documentation.
boot glue
nbupdate
nupdate
nupdatef
rcpprog
rcpwipe
reboot
setboot
debug add
clear
clrwatch
del
dis
fi
mb
mi
ml
norcp
pstack
reg
sb
sd
setwatch
si
sl
stack
sym
test
watch
wb
wi
wl
To Next Page
Loading...
