Menu Structure
45
help
Usage:
help [-h]
Shows a list of the sub-scopes and commands available in the current scope, complete with a
short reminder of the purpose of each command or scope.
ls
Usage:
ls -h
ls
ls <path>
This lists a scope contents. With no arguments, the contents of the current scope are displayed;
otherwise the specified scope contents are shown. The scope parameter may be specified
either as relative to the current scope or by an absolute scope path beginning with '/'. See the
cd command (above) for details about path naming conventions.
pwd
Usage:
pwd [-h]
Displays the absolute path of the current scope.
su
Usage:
su [-h]
Changes to supervisor/privileged user mode. This asks for a password, which can be changed
once access in privilege mode is granted. The default password is 'citel', if you change this,
take care to remember the password or your Gateway board may not be configurable in the
future.
To leave privileged mode, use CTRL-D, which closes the current user interface session.
ver
Usage:
ver [-h]
This displays the version string contained in the running software. If the version string for the
running software and the version string for the software version held in flash are different, both
version strings are displayed clearly marked.
To Next Page
Loading...
