7. Press the Save softkey to save the speed dial information to the key you selected.
CREATING A SPEED DIAL SOFTKEY USING THE MITEL WEB UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Speed Dial to apply to the key.
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter the phone number, extension, or speed dial prefix to apply to this
key. If you enter a speed dial prefix, you must enter the + character at the end of the prefix
number (for example, 123456+).
6. In the Line field, select a line to apply to this key. Valid values are 1 through 24.
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
Expansion Module Keys
8. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
9. In the Type field, select Speed Dial to apply to the key.
10. In the Value field, enter the phone number, extension, or speed dial prefix to apply to this
key. If you enter a speed dial prefix, you must enter the + character at the end of the prefix
number (for example, 123456+).
11. In the Line field, select a line to apply to this key. Valid values are 1 through 24.
12. Click Save Settings.
MITEL WEB UI
To Next Page
Loading...
