32 Mitel 6873 SIP
eud-1744/1.4 – R5.0 HF2 – 10.2017
Phoning
Selecting from the call list
You want to call a user from one of the three call lists. You can choose
from the following call lists:
Your phone automatically stores the person's phone number and name in
a call list in the MiVoice Office 400 communication system. Within the one
number user concept (see chapter "One number user concept", page 8
)
you can call back users through one of these call lists. An individual call list
contains a maximum of 30 entries. More information on call lists can be
found in chapter "Editing options for the call list", page 65
.
The call lists can be operated via the call list key, the redial key, the system
menu, or a function key (see chapter "Configuring keys", page 89).
Menu Description
Unanswered calls List of callers who tried to reach you when you were
absent. The missed calls are signalled on the display
( ); the LED on the call list key is red.
Note:
If your system administrator selected the call list display
type Picture ID (see chapter "Editing options for the call
list", page 65), the LED will only light up when you press
the call list key.
Answered calls List of calls answered.
Redial list List of calls made.
Call list for unanswered/answered calls:
Press the call list key.
Select the desired call list.
➔List of most recent calls/conversations (including the presence status of the
contact) is displayed.
Scroll through the list and select the user you want.
Pick up the handset or press the Dial softkey.
➔The call number of the user is dialled.
Note: Once the call has been successfully connected, the entry is deleted from the
unanswered call list.
To Next Page
Loading...
Need help?
General
