Mitel 6869 SIP - Operating Call Lists and Voice Messages

72 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Phoning
Operating call lists and voice messages
In this section, you will learn how to use call lists and voice mes-
sages which are stored in the MiVoice Office 400 communication sys-
tem.
Editing options for the call list
The call lists (unanswered/answered calls and redial list) include a maxi-
mum of 30 entries each. Once the list is full, the oldest entry on the list will
be deleted.
Missed calls are signaled on the display; the LED of the call list key is red.
The following options are available for further editing of the entries:
Note: The form in which the call is displayed depends on the settings your sys-
tem administrator selected in the MiVoice Office 400 communication sys-
tem: Advanced or Picture-ID. Contact your system administrator for more
information.
For activating call forwarding to a call number, select User as the call forwarding
option and confirm with the Select softkey.
Enter the forwarding destination call number and confirm with the Select soft-
key.
➔The call forwarding is activated to the destination call number.
For activating call forwarding to a voice mail, select Voice Mail as the call for-
warding option and confirm with the Select softkey.
➔The call forwarding is activated to the voice mail.
Deactivate call forwarding:
Press the function key for Menu.
Scroll to Call forwarding and press the navigation key to the right or press the
Select softkey.
Select the option Call forwarding off and confirm with the Select softkey.
➔The call forwarding is deactivated.