Personalizing your phone
Mitel 6873 SIP 75
eud-1744/1.4 – R5.0 HF2 – 10.2017
Configuring the display
This section explains how to set display properties.
Setting the display
You may find the display is too bright or too dark.
Display Description
Home Screen Setting possibilities for the idle screen.
• Home screen mode Set display for the idle screen (see chapter "Enter the
display text for the idle state", page 83):
Mode 1: The display text 1 for the idle screen appears on
the top left next to the line key; date and time are dis-
played in the middle.
Mode 2: Display text 1 and 2 for the idle screen appear
above date and time.
• Screen Saver Timer Time in seconds (0-7200 seconds) for which the back-
light should remain activated before the screen saver is
displayed (0 means no screen saver).
Brightness Setting possibilities for the screen brightness.
• Brightness Level Display brightness of level 1 (dark) to 5 (bright).
• Brightness Timer Time in seconds (1-7200 seconds) for which the back-
light is to remain on in the idle state. After this time the
brightness is dimmed. Default value is 600 seconds
(10 minutes).
Press the Option key.
Press Display.
Setting home screen mode:
1. Press the arrow key and select the desired mode.
2. Confirm with the softkey Save.
Setting the duration for the screen saver:
1. Tap onto the input field and enter the desired time in seconds.
2. Confirm with the softkey Save.
To Next Page
Loading...
Need help?
General
