Mitel 6869 SIP - Configuring the Audio Properties

Personalizing your phone
Mitel 6867 SIP / Mitel 6869 SIP 85
eud-1664/2.0 – R6.0 – 06.2018
Configuring the audio properties
This section explains how to set audio properties.
Adjusting the volume
You want to change the volume of the ring tone or the handset during a
call.
Ring volume: You can adjust the volume in the idle state or when the ring
tone sounds. Press and hold the volume down button to switch off the ring
tone completely.
Handset volume: You need to set the volume of handset and loudspeaker
separately. The new handset volume will remain saved even after the call
is ended.
Setting the ringing properties
You want to change the way in which your phone rings.
Available settings:
Setting the brightness:
Set the desired brightness level using the horizontal navigation key and confirm
with the Save softkey.
Setting the duration for brightness:
Enter the desired time in seconds in the input field and confirm with the Save
softkey.
Adjusting the volume (in idle state, during ringing phase/call):
Quieter: Press the key.
Louder: Press the key.
Ring tones Description
Ring tone mode
• Ring tone 1...15 Selection of available ring melodies.