84 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Personalizing your phone
Configuring the display
This section explains how to set display properties.
Setting the display
You may find the display is too bright or too dark.
Display Description
Home Screen Setting possibilities for the idle screen.
• Screen Mode Set display for the idle screen (see chapter "Enter the
display text for the idle state", page 91):
Mode 1: The display text 1 for the idle screen appears on
the top left next to the line key; date and time are dis-
played in the middle.
Mode 2: Display text 1 and 2 for the idle screen appear
above date and time.
• Screen Saver Timer Time in seconds (0-7200 seconds) for which the back-
light should remain activated before the screen saver is
displayed (0 means no screen saver).
Brightness Setting possibilities for the screen brightness.
• Brightness Level Display brightness of level 1 (dark) to 5 (bright).
• Brightness Timer Time in seconds (1-7200 seconds) for which the back-
light is to remain on in the idle state. After this time the
brightness is dimmed. Default value is 600 seconds
(10 minutes).
Press the Option key.
Scroll to Display and press the selection key.
Setting home screen mode:
Set the desired mode using the horizontal navigation key and confirm with the
Save softkey.
Setting the duration for the screen saver:
Enter the desired time in seconds in the input field and confirm with the Save
softkey.
To Next Page
Loading...
