Personalizing your phone
Mitel 6873 SIP 81
eud-1744/1.4 – R5.0 HF2 – 10.2017
Selecting the time and date
The settings for the time and date are made by your system administrator.
The following chapter is thus intended for your system administrator or
technician, who will then set the time and date for you.
As system administrator or technician, you can make global settings for
the time and date for all Mitel SIP phones in the MiVoice Office 400 com-
munication system. If no NTP time server is entered in the communication
system, then you can also make these settings over the phone. Available
settings:
Setting Description
Settings
• Time format 12-hour or 24-hour clock format.
• Daylight savings • List of available summer time formats.
–Off
– 30min summertime
– 1h summertime
– Automatic
• Date format List of available date formats.
Time zone List of available global time zones.
Set Date and Time Set the time and date manually or select Use Network
Time and select the settings for the time server.
• Use network time The settings for the time and date are controlled by the
communication system. The time/date are shown on the
display when in the idle state.
• Time server 1-3 Settings when Use Network Time is activated:
Setting menu for the IP address or domain name of the
time server. If a valid time server is set, then the phone
synchronises the displayed time with the specified con-
figuration server. The phone adopts the time from time
server 1. If this is not configured or cannot be reached,
then the phone queries first time server 2 and then 3.
• Time
• Set date
Settings when Use Network Time is deactivated:
Setting menu for the time. The time/date are shown on
the display when in the idle state.
To Next Page
Loading...
Need help?
General
