Personalizing your phone
Mitel 6867 SIP / Mitel 6869 SIP 99
eud-1664/2.0 – R6.0 – 06.2018
Interchangeable key caps
You can change the position of certain function keys or switch them with
other functions. You can swap existing key caps or fit keys with the addi-
tional key caps supplied in accordance with table below. The keys must
have been configured either by your system administrator or by yourself in
the Self Service Portal (see chapter "MiVoice Office 400 Self Service Por-
tal", page 9).
Note: If your phone is activated as free seating phone, the configuration of keys
with interchangeable key caps is locked.
Configuring or deleting a key assignment
You want to configure a configurable key with a call number, function or
busy lamp field, or you want to delete the key configuration.
Function key Key cap
interchangeable
Additional key cap
(included in the scope of
delivery)
Call lists key yes
Do not disturb key yes
Conference key
1)
1)
The key can only be set for functions that do not require an LED signal.
yes (Mitel 6867 SIP
only)
2)
2)
Key can only be configured as a number or function key.
Line key L1 yes
Line key L2 yes
Line key L3 yes
Line key L4 yes
Phone book key
1)
yes (Mitel 6867 SIP
only)
2)
Forwarding button yes
Voice mail key yes
Redial key yes
Deflect key
1)
yes (Mitel 6867 SIP
only)
2)
To Next Page
Loading...
