98 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Personalizing your phone
You can assign each key a specific action type so that you can trigger a
particular action by simply pressing that key. The following choices are
available:
Configurable key You can store call numbers, functions or busy lamp
fields on a configurable key.
Line key Line keys are set by your system administrator. For more
information on line keys, refer to chapter "Dialing with
the line key", page 40.
Action type Designation Description
Call number Number key Configure a key with a call number and name
Function Function key Configure a key with a function in order to run
or activate/deactivate a function.
Busy lamp field Team key Configure a key with your team partner's call
numbers. Team keys are only possible on the
top softkeys.You can also configure busy lamp
field on the keys of expansion key module.
KT line Line key KT lines are the external line keys. A KT line is
associated with a call distribution element
number (CDE). External user can reach you on
the KT line using the Direct Dial In (DDI) num-
ber associated with the KT line. Contact your
sytem administrator for more information. Your
phone becomes a key telephone as soon as
your system administrator has configured a KT
line on the top softkeys of your phone.
For more information on KT line keys, please
refer to "Line keys on a key telephone",
page 79.
Personal line Personal call
key
Personal line on key telephones on which you
can make personal calls. The personal line is
created when your system administrator
assigns a key on your phone as a personal line
while configuring the KT line.
Operator key Operator key Operator keys are configured by your system
administrator on your operator phone. You can
make some changes in the operator-key con-
figuration. External and internal calls are sig-
naled dynamically and acoustically with alarm
melody on the operator keys. Contact your
sytem administrator for more information.
Key Description
To Next Page
Loading...
