Mitel 6869 SIP - Page 34

34 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Phoning
Using your phone in hands-free mode
You want other people to join the conversation or to have your hands free
while making the call.
The hands-free mode function activates the loudspeaker and the micro-
phone. Make sure the hands-free microphone is not obstructed. The
sound quality is improved if you set the volume of your phone to a low set-
ting.
Automatic hands-free mode
1)
: The function Automatic hands-free allows
you to answer a call without picking up the handset or pressing a key. The
following settings are available. This function Automatic hands-free can
only be activated/deactivated by your system administrator in the MiVoice
Office 400 communication system.
Rejecting a call:
Press the End key or the Ignore softkey during the ringing phase.
➔The connection is rejected and, depending on the system configuration, the
caller either hears the busy tone or is forwarded to a preconfigured destina-
tion.
Deflecting a call:
1. Press the Deflect softkey during the ringing phase.
2. Enter the number to which you want to deflect the call and press the Deflect
softkey.
➔The call is redirected to the destination call number.
Silencing a call:
Press the Silence softkey during the ringing phase.
➔The ringing of the incoming call is stopped. The call is still signaled optically
and can be answered in the normal way.
1)
from MiVoice Office 400 communication server software version R4.0 SP1
onwards
Menu Description
Off Automatic hands-free is always deactivated.
Announcement only Automatic hands-free is only activated when you are
receiving an announcement.
On Automatic hands-free is always activated. Your phone
signals an incoming call with two short signal tones and
then switches to hands-free mode automatically.