Mitel 6869 SIP - Page 48

48 Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
Phoning
Making a conference call
You want to make a conference call.
A conference call allows you to connect three call parties. From a confer-
ence call, you can initiate an enquiry call to someone else. You can broker
between the conference participants and the enquiry call party. Depending
on the system configuration, a conference call can consist of up to six con-
ference participants. You can hold a conference call with internal and
external users.
Note: If you have a user account for the Self Service Portal, you can create con-
ference rooms there (see chapter "MiVoice Office 400 Self Service Portal",
page 9).
Setting up a conference (you are connected):
Press the Conference key. (Mitel 6867 SIP only)
Press the Conference softkey.
Enter the phone number of the second conference call party.
Press the Dial softkey.
➔The conference party answers the call.
Press the Conference key. (Mitel 6867 SIP only)
Press the Conference softkey.
Notes: • You can also set up a conference by pressing the busy lamp field keys to
which you have saved the call party.
• You can change the procedure by first starting an enquiry call before you set
up a conference.
Leaving a conference call:
Put the handset on-hook or press the End key.
Press the Drop softkey, put the handset on-hook, or press the End key.
(Mitel 6867 SIP only)
➔The other conference parties remain in the call.