8. To drop a party from the conference, use the 5 or 2 navigation keys to highlight the desired
party and press the Drop key.
Creating a Conference Call By Joining Two Existing Calls
1. Ensure you are on an active call with one of the parties with whom you wish to create a
conference (the other party should be placed on hold).
2. Press the 5 or 2 navigation keys to highlight the party you wish to conference in.
3. Press the Conf softkey. The two parties will connect with you to form a conference call.
IP PHONE UI
Note: Direct conferencing can be performed in either the Mult-View Call screen or
Detailed View Call screen.
To Next Page
Loading...
