5. Press the 3 key to move to back to the options column and press the 2 key to highlight
DHSG.
6. With DHSG highlighted press the 4 key to move to selection column.
7. Use the 5 and 2 keys to scroll through and choose whether or not to enable DHSG. Valid
values are:
• DHSG is OFF (default)
• DHSG is ON
8. Press the Save softkey to save your changes.
RING TONES AND TONE SETS
There are several distinct ring tones a user can select to set on the IP phones. In addition to
the 15 pre-installed ringtones, custom ring tones can be manually installed through the Web
UI and selected for use (if enabled by your Administrator). You can enable/disable these ring
tones on a global or per-line basis.
The following table identifies the valid settings and default values for each type of configuration
method.
To Next Page
Loading...
