Mitel 6869i - Assistant Phone Features

Additional Features
207
Configuring the Initiate Call Key on an Assistant’s Phone Using the Mitel Web UI
Use the following procedure to configure the Initiate Call Key on an Assistant’s phone using the Mitel
Web UI:
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module Keys.
2. Select a key that you want to use as an Initiate Call key.
3. In the "Type" field, select "Speeddial".
4. In the "Label" field, enter a label to apply to this key (e.g. Init).
5. In the "Value" field, enter the Initiate Call FAC (e.g. #64)
or
In the "Value" field, enter the Initiate Call FAC, followed by the Executive’s Address (e.g.
#644052)
or
In the "Value" field, enter the Initiate Call FAC, the Executive’s Address, followed by an
asterisk, and then the Destination Address (e.g. #644052*4059)
6. In the “Line” field, select the line for which you want to use the key functionality.
7. Click Save Settings to save your settings.
MITEL WEB UI