38 Mitel 6940 SIP
eud-1765/2.0 – R6.0 – 06.2018
Phoning
Activating another Mitel phone for making calls
You want to make a call on another Mitel phone using your personal set-
tings, for example on a colleague’s phone or in a meeting room.
You can activate another Mitel phone to make an internal or external call
using your personal settings, even if the phone is locked for external calls.
You can activate the phone for a business or private call. Once you have
activated the phone using a function code and your PIN, dialing by your
private phone book is available. The called party's display shows your per-
sonal phone number and not the number of the phone from which you are
making your call. Any call charges incurred will be charged to you. The call
number dialed is not stored in the last-number redial list.
Holding the call and switching lines:
Press a second, free line key or select a new line key.
Enter the phone number.
➔The call is held on line key 1 and the call on line key 2 is active.
Note: Press line key 1 to return to your conversation partner on line 1 (see also chap-
ter "Brokering between an enquiry call party and your call partner", page 44
).
Business calls:
1. Enter function code #36 for a business call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the internal or external phone number with the exchange access digit.
Pick up the handset.
➔The phone number displayed is dialed.
Note: When you hang up, dialing by name and your private phone book remain avail-
able for a whole minute so you can make another call.
To Next Page
Loading...
