Mitel 6940 SIP - Mobilelink

Phoning
Mitel 6940 SIP 79
eud-1765/2.0 – R6.0 – 06.2018
MobileLink
This section explains how to set the MobileLink feature.
Your phone supports MobileLink, a feature that provides seamless mobile
integration using Bluetooth wireless technology.
Using the MobileLink feature, you can:
• Sync your mobile phone’s contact list and call history with the Mitel SIP
phone.
• Answer a mobile phone call using your SIP phone.
• Move mobile call audio between the SIP phone and your mobile phone.
Note: • Additional Bluetooth devices connected to your mobile phone such as
smartwatches and headsets might impede or alter the behavior of the
MobileLink feature. It is recommended that you disconnect any addi-
tional Bluetooth devices from your mobile phone when using the
MobileLink feature on your SIP phone.
To configure the MobileLink key, you must log in to the Self Service Portal.
For more information about the MiVoice Office 400 Self Service Portal, see
the section "MiVoice Office 400 Self Service Portal", page 9
. You can con-
figure Mobile keys only on the top softkeys.
Using remote control from a third-party phone:
1. Enter function code #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the function code for activating/deactivating the function you want.
Pick up the handset.
➔You hear the acknowledgement tone.
Put the handset on-hook.
➔The function is activated/deactivated.
Note: The default PIN setting ‘0000’ is not accepted (for more information on the PIN,
see chapter "Changing the PIN", page 94
).