Mitel 6940 SIP - Page 41

Phoning
Mitel 6940 SIP 41
eud-1765/2.0 – R6.0 – 06.2018
Notes: • You can activate only one callback at a time.
• An unanswered callback will be automatically cancelled by the system
after about 30 minutes.
To answer the callback request
Someone has asked you to call back. The display shows Callback
requested from number (for example: Callback 56022).
You cannot automatically answer a callback request on your phone. You
can either enter the call number manually or use a CTI client, for example
the Mitel OfficeSuite.
Hide number
You do not want your call number to appear on the terminal display of a
called party in the public network. The following options are available here:
Activating callback:
You called someone and hear the busy tone or the ring-back tone. Press the
function key for Callback.
➔Depending on the communication system, you hear the acknowledgement
tone.
Put the handset on-hook.
➔The display shows Call expected.
Clear callback:
Press the function key for Callback.
➔Callback request is deleted.
Answering the callback request:
Enter a phone number in call preparation.
Pick up the handset or press the Dial softkey.
Note: You cannot delete a callback request.