Phoning
Mitel 6940 SIP 53
eud-1765/2.0 – R6.0 – 06.2018
Activating personal call routing
You want to specify which of your phone shall ring when you receive a call.
You can specify the phone on which a call is signaled with personal call
routing.
Your system administrator set up multiple phones with the same phone
number in the one number user concept for you (see chapter"One number
user concept", page 8). The system administrator has also assigned you
permission to configure routing in the Self Service Portal. This allows you
to set up 5 routings in the Self Service Portal for a range of situations
("Office", "Home Office", "On the road").
You can only answer a call on the phone on which the call is signaled. If
you have not configured a call routing, the default setting (all phones are
ringing) is used as standard.
The following options are available on your phone for further editing of per-
sonal call routing:
Menu Description
Activate Activating personal call routing.
Modify Renaming personal call routing.
Change settings The personal call routing settings can only be changed
by your system administrator or yourself in the Self Ser-
vice Portal.
Delete A personal call routing can only be deleted by your sys-
tem administrator or yourself in the Self Service Portal.
Activating/deactivating personal call routing
Press the function key for Menu.
Press Personal call routing.
➔A list of your routings is displayed.
Select the call routing you want and confirm with the Activate softkey.
➔The selected routing is activated and another is deactivated.
Renaming personal call routing:
Press the function key for Menu.
To Next Page
Loading...
