82 Mitel 6940 SIP
eud-1765/2.0 – R6.0 – 06.2018
Phoning
Note: • You might need to acknowledge the request on your mobile phone.
• If the update fails, a message notifying the failure to retrieve contacts is
displayed on screen. Press Retry to attempt to update again, or Cancel
to cancel the attempt.
• Some mobile phones sync only the contacts that are stored on the
phone’s flash memory. Contacts stored on the phone’s SIM card might
not sync with the Mitel SIP phone.
• Mobile contacts are cleared from the Directory application when the
phone’s firmware is upgraded. If your mobile device is configured to
allow for automatic re-synchronization, your phone synchronizes the
contacts again the next time your mobile device connects to your SIP
phone. If your mobile phone is not configured for automatic re-synchro-
nization, you must manually synchronize your mobile contacts.
Answering an incoming mobile call using your
SIP phone
When your mobile phone is paired and connected to your SIP phone,
incoming calls on your mobile phone are indicated on your SIP phone also.
Note: Press the Decline ( ) key to reject an incoming mobile phone call.
Press the Mobile Contacts folder.
Press the Reload softkey.
➔Your phone attempts to re-synchronize and update your mobile contacts.
To answer the incoming mobile call using your SIP phone:
Pick up the handset for the handset operation.
Or,
Press the Speaker/Headset key ( ), or the Mobile softkey, or the Answer
softkey for hands-free operation.
To Next Page
Loading...
