Mitel 6940 SIP - Page 89

Personalizing your phone
Mitel 6940 SIP 89
eud-1765/2.0 – R6.0 – 06.2018
Ring volume: You can adjust the volume in the idle state or when the ring
tone sounds. Press and hold the volume down button to switch off the ring
tone completely.
Handset volume: You need to set the volume of handset and loudspeaker
separately. The new handset volume will remain saved even after the call
is ended.
Setting the ringing properties
You want to change the way in which your phone rings.
Available settings:
Adjusting the volume (in idle state, during ringing phase/call):
Quieter: Press the key.
Louder: Press the key.
Ring tones Description
• Ring tone 1...15 Selection of available ring melodies.
• Silent If you do not want to be disturbed during a certain time,
you can set your phone not to ring with Suppress ring
tone.
Tone set Country-specific ring tone settings. This menu is set by
your system administrator.
Setting the ring:
Press the Option key.
Press Audio > Ring Tones.
1. Tap the settings you want, the ring melody is played.
2. Confirm with the softkey Save.
➔Move your finger upwards and downwards in the list to see the entire list of
ring melodies.