Mitel 6940 SIP - Page 90

90 Mitel 6940 SIP
eud-1765/2.0 – R6.0 – 06.2018
Personalizing your phone
Note: • A list of alarm melodies is available for playback: Menu > Alarm melo-
dies > Test.
• You can configure individual ring tones for each busy lamp field and line
key using the Self Service Portal. For more information about the Self
Service Portal, please refer to "MiVoice Office 400 Self Service Portal",
page 9.
Setting the audio properties
Using your phone, you can make and answer calls using the handset,
headset or hands-free system.You can set custom ring melodies for your
phone. The audio settings allow the use of different combinations of these
three operation modes in order to achieve maximum flexibility in phone
operation. The following options are available for selection:
Audio settings Description
Audio Mode: Setting possibilities for headset mode:
• Speaker
(default)
The connection is established via the handset or the
hands-free system.
• Press the loudspeaker/headset key when in handset
mode to switch to hands-free mode.
• Pick up the handset when in hands-free mode to
switch to handset mode.
• Headset The connection is established via the handset or the
headset.
• Press the loudspeaker/headset key when in handset
mode to switch to headset mode.
• Pick up the handset when in headset mode to switch
to handset mode.
• Speaker/Headset At first, incoming calls are connected in hands-free
mode by pressing the loudspeaker/headset key.
• Press the loudspeaker/headset key repeatedly to
switch back and forth between hands-free mode and
headset.
• Pick up the handset to return the conversation from
hands-free mode or headset to the handset at any
time.