Personalizing your phone
Mitel 6940 SIP 91
eud-1765/2.0 – R6.0 – 06.2018
Notes: • To find out how to make phone calls with the headset, refer to "Using a
headset", page 33.
• More information on the function Automatic hands-free can be found in
chapter "Using your phone in hands-free mode", page 31
.
• You phone will automatically switch to the right audio mode if a USB
headset is connect, if Bluetooth is activated and a Bluetooth headset is
connect or when the headset is disconnected.
• Headset/Speaker At first, incoming calls are connected in headset mode
by pressing the loudspeaker/headset key.
• Press the loudspeaker/headset key repeatedly to
switch back and forth between headset mode and
hands-free mode.
• Pick up the handset to return the conversation from
hands-free mode or headset to the handset at any
time.
Headset: Setting possibilities for your headset:
• Headset Mic Vol Sets the volume of the headset microphone.
• DHSG Activate/deactivate DHSG.
Phoning using a cordless headset based on the DHSG
standard allows you to set up and to end calls from the
headset. Ask your dealer which headsets are particularly
well suited for this phone.
To avoid damages on the phone, always disconnect the
phone from the mains power first before you install a
DHSG headset.
Audio settings Description
Press the Option key.
Setting the audio mode:
1. Press Audio > Audio Mode.
2. Select the mode you want and confirm with the Save softkey.
Setting the headset:
1. Press Audio > Headset.
2. Select the volume you want and confirm with the Save softkey.
To Next Page
Loading...
