3 Description of functions
3-1
3. Description of functions
This chapter explains the methods for using the six Ethernet option functions with a system in which the controller and network
personal computer are connected with a one-on-one cross cable.
(1) Using the controller communication function ... Refer to Chapter 3.1
(2) Using the data link function ... Refer to Chapter 3.2
(3) Using the real-time external control function ... Refer to Chapter 3.3
(4) Using the real-time monitoring function ... Refer to Chapter 3.4
(5) Using SLMP ... Refer to Chapter 3.5
(6) Using the CC-Link IE Field Network Basic function ... Refer to Chapter 3.6
To Next Page
Loading...
