Mitsubishi Electric CR800 Series - Page 64

3 Description of functions
3-38
 Request destination network No., request destination station No.
Specify the access destination network No. and station No. Specify the network No. and station No. in hexadecimal.
Send the request destination network No. and request destination station No. in the order from higher-order byte to
lower-order byte.
• Network No. range
Host station: 00H
Other station: 01H to EFH (1 to 239)
• Station No. range
Host station: FFH (when the network No. is 00H)
Other station: 01H to 78H (1 to 120)
The host station has a network No. of 00H and a station No. of FFH. Other stations have other values.
The request data addressed to the own station is received regardless of the network No. and station
No. settings.
Furthermore, the request data addressed to the other stations is received when the SLMPNWNO and
SLMPNDID settings are the same.
Example
ASCII code
Binary code
ASCII code
Binary code
When 1AH(26) is specified as the request destination network No.
When 1AH(26) is specified as the request destination station No.