Mitsubishi Electric CR800 Series - Replace Character String

3 Description of functions
3-40
 Request data length
Specify the data length from the monitoring timer to the request data in hexadecimal. (Units: bytes)
• When performing data communication in ASCII code
Send data in the order from higher-order byte to lower-order byte.
• When performing data communication in binary code
Send data in the order from lower-order byte to higher-order byte.
 Monitoring timer
Not used (fixed to 0000H)
Request data
length
Monitoring
timer
Request data
Hexadecimal (unit: bytes)
ASCII code
Binary code
When the request data length is 24 bytes
Example
ASCII code
Binary code
When 10H specified for monitoring timer
Example