Mitsubishi Electric CR800 Series - Debugging Operations; Starting the Step Operation

3 Description of functions
3-62
• Number of devices
Specify the number of devices to be written.
Item
Number of devices
ASCII code
Binary code
When writing data in bit units
1 to 3584 devices
1 to 7168 devices
When writing data in word units
1 to 960 devices
• Write data
Specify the value to be written to all the devices specified in "Number of devices" in the request data.
 Request data
There is no Write command response data.
 Communication example (when writing data in bit units)
Write values to M100 to M107.
• When performing data communication in ASCII code
• When performing data communication in binary code
 Communication example (when writing data in word units (bit device))
Write values to M100 to M131 (data for two words).
• When performing data communication in ASCII code
(Request data)
Subcommand
Device
code
First device No.
Number of devices
Write data
(Request data)
Sub-
command
Device
code
First device
No.
Number of
devices
Write data
(Request data)
Subcommand
Device
code
First device No.
Number of devices
Write data