Mitsubishi Electric CR800 Series - Move Program Files; Delete Program Files

3 Description of functions
3-71
• Device code, Device No., Write data
Specify devices to be written.
When writing data in bit units, specify bit devices.
Specify write data in hexadecimal.
Item
Description
Word access
Specify devices based on the number set in the request data for word access. It
is not necessary to specify devices when "0" is set.
Double-word access
Specify devices based on the number set in the request data for double-word
access. It is not necessary to specify devices when "0" is set.
• Set/reset
Specify ON/OFF for bit devices.
Item Subcommand
Data to be written
Remarks
When
turned ON
When turned
OFF
ASCII code
0003
0002
"0001"
"0000"
Send 4 digits in order from "0"
0001
0000
"01"
"00"
Send 2 digits in order from "0"
Binary code
0003
0002
0100H
0000H
Either of the 2-byte numerical values
on the left is sent.
0001
0000
01H
00H
Either of the 1-byte numerical values
on the left is sent.
 Response data
There is no Write Random command response data.