8 The Operation of GX Works2
8.6 Ethernet Diagnostics
99
FX3U-ENET-ADP User's Manual
1
Introduction
2
Specification
3
System
Configuration
4
Installation
5
Wiring
6
Introduction of
Functions
7
Communication
Using
MC Protocol
8
The Operation
of GX Works2
9
Troubleshooting
A
List of Special
Devices
8.6 Ethernet Diagnostics
The Ethernet diagnostics function checks various setting status in the Ethernet adapter.
• Ethernet diagnostics function outline
When the Ethernet adapter is used, the Ethernet diagnostics function monitors and tests the following
items.
For details, refer to Subsection 8.6.1 through Subsection 8.6.7.
Function Description
Parameter status IP address, Ethernet address, etc. are displayed.
Error history Connection No., Error code, Port number, Date, Time, etc. are displayed.
Status of each connection
(Access History)
• Status of each connection : Host station port No., Destination IP address, Destination port No., Latest
error code, etc. are displayed.
• Access History : Date, Time, Connection No., Destination IP address, etc. are displayed.
("Access History" is displayed together with "Status of each connection")
Status of each protocol TCP packet number and UDP packet number are displayed.
Connection status Full Duplex/Half Duplex, Connection status and 10BASE-T/100BASE-TX are displayed.
Time setting status Latest time setting, Time required for response are displayed.
PING test
This test checks the presence of Ethernet modules on the Ethernet network whose initial processing is
completed, or the presence of specified IP address.
To Next Page
Loading...
