Mitsubishi Electric FX3U-ENET-ADP - Print Function; Printing from the Menu

8 The Operation of GX Works2
8.7 Print Function
111
FX3U-ENET-ADP User's Manual
1
Introduction
2
Specification
3
System Configuration
4
Installation
5
Wiring
6
Introduction of Functions
7
Communication Using MC Protocol
8
The Operation of GX Works2
9
Troubleshooting
A
List of Special Devices
8.7 Print Function
This section explains the print content of each setting in the Ethernet adapter.
Caution
Printing Ethernet adapter information cannot be executed when "Channel" is set to "None" in the Ethernet
adapter setting.
8.7.1 Printing from the menu
Select "Print" on the "Project" menu to display the batch print menu. "Ethernet adapter" is displayed on the
"PLC Parameter" in the menu.
Printing item screen displayed when "Print" is selected on the "Project" menu.
Caution
When "FX3U/FX3UC" is selected as the PLC type in the project, "Ethernet adapter" is valid (checked) as a
PLC parameter printing target.