Mitsubishi Electric FX3U-ENET-ADP - Log Record Setting

8 The Operation of GX Works2
8.4 Log Record Setting
93
FX3U-ENET-ADP User's Manual
1
Introduction
2
Specification
3
System Configuration
4
Installation
5
Wiring
6
Introduction of Functions
7
Communication Using MC Protocol
8
The Operation of GX Works2
9
Troubleshooting
A
List of Special Devices
8.4 Log Record Setting
On the "Log Record Setting" screen, set the error log save destination and others. The user device (D, R) is
used to save the error log, etc.
Click the [Log Record Setting] button on the "Ethernet Adapter" screen to display the screen below.
Setting Description
Set error log save destination Error log is stored if checked.
Error
log
Number of Records
Specify the number of records in the error log within the range from 1 to 16.
One record occupies devices 16 points.
Device
Range
Head device type Select the device type of the error log save destination between "D" and "R".
Head device number Set the head device number of the error log save destination.
Last device number
The last device number in the occupied range calculated from the head device number and
number of records is displayed.
Set access log save destination Access log is stored if checked.
Access
log
Number of Records
Specify the number of records in the access log within the range from 1 to 32.
One record occupies 10 points.
Device
Range
Head device type Select the device type of the access log save destination between "D" and "R".
Head device number Set the head device number of the access log save destination.
Last device number
The last device number in the occupied range calculated from the head device number and
number of records is displayed.
Set save destination for the result of time
setting
Result of time setting is stored if checked.
Save destination
for the result of
time setting
(Device Range)
Head device type Select the device type of the time setting result save destination between "D" and "R".
Head device number
Set the head device number of the time setting result save destination.
8 points are occupied from the head device number.
Last device number
The last device number in the occupied range calculated from the head device number is
displayed.