8 The Operation of GX Works2
8.5 Online Function
94
FX3U-ENET-ADP User's Manual
8.5 Online Function
8.5.1 Designation of destination to be connected
When the FX PLC is connected using the Ethernet adapter, the following route is used.
Personal
computer
side I/F
PLC side I/F
Other Station
Setting
Network
Connection pathname / Imaged figure / Explanation
Ethernet
CPU
(Direct
connection)
No Specification
Direct connection of the PLC module for Ethernet board communication
Personal computer is connected directly to the Ethernet adapter with the LAN cable.
Ethernet
CPU
(HUB)
No Specification
Connection of the PLC module via a hub for Ethernet board communication
Personal computer is connected to the Ethernet adapter via a hub. This route supports the
find CPU function.
Direct connection
Ethernet
HUB
Ethernet
To Next Page
Loading...
