8 The Operation of GX Works2
8.5 Online Function
95
FX3U-ENET-ADP User's Manual
1
Introduction
2
Specification
3
System
Configuration
4
Installation
5
Wiring
6
Introduction of
Functions
7
Communication
Using
MC Protocol
8
The Operation
of GX Works2
9
Troubleshooting
A
List of Special
Devices
1) Transfer Setup screen
When connecting the FX PLC using the Ethernet adapter, set the following contents on the "Transfer
Setup Connection" screen.
a) PC side I/F
"Ethernet Board" is chosen.
b) PLC side I/F
Double-click "PLC Module" to open the "PLC side I/F Detailed Setting of PLC Module" screen, and set
details of the connection route. For description, refer to "2)" of following page.
c) Other Station Setting
Double-click "No Specification", and set the "Check at Communication Time" and "Retry Times".
To Next Page
Loading...
