8 The Operation of GX Works2
8.6 Ethernet Diagnostics
110
FX3U-ENET-ADP User's Manual
[Description details of the result column]
1) Display of the PING test
a) Description of the IP address specification display
Pinging [IP address] with [Set size] bytes of data:
b) Example of IP address specification display
Pinging 192.168.0.3 with 32 bytes of data:
c) Description of the host name specification display
Pinging [Host name[IP address]] with [Set size] bytes of data:
d) Example of host name specification display
Pinging PLC1[192.168.0.3] with 32 bytes of data:
2) Description displayed on PING execution
• IP address
• Size of the received of the packet
• Round trip time of the packet
• Maximum lifespan of the packet
a) Description of the completion display
Reply from [IP address]:bytes=[Set size] time<1ms TTL=[Communication speed]
b) Example of completion display
Reply from 10.97.29.75:bytes=32 time<1ms TTL=64
c) Display when there is an error
Request timed out.
3) Description displayed on the reception end and the Cancel button click
• Total packet transmission count
• Success count
• Failure count
• Packet minimum round trip time
• Packet maximum round trip time
• Packet average round trip time
[Success/Transmissions]
The number of times of success and total number of times of a packet was sent are updated every time 1
packet is sent.
To Next Page
Loading...
