8 The Operation of GX Works2
8.6 Ethernet Diagnostics
109
FX3U-ENET-ADP User's Manual
1
Introduction
2
Specification
3
System
Configuration
4
Installation
5
Wiring
6
Introduction of
Functions
7
Communication
Using
MC Protocol
8
The Operation
of GX Works2
9
Troubleshooting
A
List of Special
Devices
Item and description of the PING test screen
[Address Specification]
Specify the PING test target station using the IP address or host name.
1) When specifying the IP address
Select the IP address input format (decimal or hexadecimal).
Specify the IP address of the target station in accordance with the selected input format (decimal or
hexadecimal).
2) When specifying the host name
Specify the host name of the external device set in the "HOSTS" file in the personal computer where GX
Works2 is installed or set in the DNS server.
It is possible to enter the IP address in the "IP Address/Host Name" input field.
[Setting Options]
Set details of the PING test. (It is not necessary to set this field when the initial value is used in each item.)
1) Display the host name
Check this item when displaying the host name instead of the IP address of the PING test target station.
2) Specify the data size
Specify the size of the system data sent in the PING test.
Setting range : 1 to 8192 byte (Default : 32 byte)
3) Specify the time of the communication time check
Specify the time to wait for a response in the PING test.
Setting range : 1 to 30 second (Default : 1 second)
4) Specify the number of transmissions
Specify the number of times the PING test is executed.
Item Description
Input
item
Address
Specification
IP Address Set PING test target station IP address.
IP Address Input Format Input format of the IP address and decimal/hexadecimal are chosen.
IP Address/Host Name Set IP address or host name.
Setting
Options
Display the host name
When this item is checked, the host name corresponding to the IP address is
displayed in the "Result" field.
Specify the data size
Specify arbitrary size of the system data sent in the PING test.
[Setting range]
• 1 to 8192 byte
(Default : 32 byte )
Specify the time of the
communication time
check
The completed latency time of the PING test is specified.
[Setting range]
• 1 to 30 second
(Default : 1 second)
Specify the number of
transmissions
Number of transmissions is specified. Or it executes until it is stopped.
[Setting range]
• 1 to 50 times
(Default : 4 times)
Default Set default values to all settings in "Setting Options".
Execute PING test is executed.
Cancel PING test is stopped.
Result
Result The result of the PING test is displayed.
Success/Transmissions
The total number of times a packet was sent and number of times it was successful in
the PING test are displayed.
Select item Description
Specify the number of times
The PING test is executed the specified number of times.
Setting range : 1 to 50 times (Default : 4 times)
Execute till interrupting The PING test is executed repeatedly until the [Cancel] button is clicked.
To Next Page
Loading...
