8 The Operation of GX Works2
8.1 Ethernet adapter Setting
89
FX3U-ENET-ADP User's Manual
1
Introduction
2
Specification
3
System
Configuration
4
Installation
5
Wiring
6
Introduction of
Functions
7
Communication
Using
MC Protocol
8
The Operation
of GX Works2
9
Troubleshooting
A
List of Special
Devices
*1. Set the IP address, subnet mask pattern and default router IP address upon consulting a network
administrator.
Subnet Mask Pattern
*1
Specify the subnet mask pattern.
[Setting range]
• 192.0.0.0 to 255.255.255.252 (Decimal)
• C0.00.00.00 to FF.FF.FF.FC (Hexadecimal)
Default Router IP Address
*1
Specify the IP address of the default router when it is used.
[Setting range]
• 0.0.0.1 to 223.255.255.254 (Decimal)
• 00.00.00.01 to DF.FF.FF.FE (Hexadecimal)
Communication Data Code
Select the data code used for communication using the MC protocol.
•Binary Code
Communicates by binary code.
• ASCII Code
Communicates by ASCII code.
Disable direct connection to
MELSOFT
Select whether or not direct connection to MELSOFT is disabled.
Do not respond to search for
CPU on network
Select whether or not response is given to search for CPU on the network.
Open Setting
A click of the button will display "Ethernet Adapter Open Setting" screen.
For details, refer to Section 8.2.
Time Setting
A click of the button will display "Ethernet Adapter Time Setting" screen.
For details, refer to Section 8.3.
Log Record Setting
A click of the button will display "Ethernet Adapter Log Record Setting" screen.
For details, refer to Section 8.4.
Setting Description
To Next Page
Loading...
