Mitsubishi Electric MELSEC FX3U - Pointer [P and I]; Numbers of Pointers

152
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
4 Devices in Detail
4.12 Pointer [P and I]
4.12 Pointer [P and I]
4.12.1 Numbers of pointers
The table below shows numbers of pointers (P and I). (Numbers are assigned in decimal.)
When using a pointer for input interrupt, an input number assigned to it cannot be used together with a "high
speed counter" or "speed detection (FNC 56)" which uses the same input range.
1. FX3U/FX3UC PLC
2. FX
3G PLCs
For branch
For input interrupt/input delay
interrupt
For timer interrupt
For counter
interrupt
For jump to
END step
P0 to P62
P64 to P4095
4095 points
P63
1 point
I00(X000) I30(X003)
I10(X001) I40(X004)
I20(X002) I50(X005)
6 points
I6
I7
I8
3 points
I010 I040
I020 I050
I030 I060
6 points
For branch For input interrupt For timer interrupt
For jump to
END step
P0 to P62
P64 to P2047
2047 points
P63
1 point
I00(X000) I30(X003)
I10(X001) I40(X004)
I20(X002) I50(X005)
6 points
I6
I7
I8
3 points