950
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-1 Programming Tool Applicability
Appendix A-1-2 Cautions on writing during RUN
"In the FX3G, FX3U and FX3UC PLCs, writing is enabled during RUN (program changes during RUN mode)
using the following programming tools."
→ For the operating procedure of and cautions on writing during RUN,
refer to the respective programming tool manual.
Programming tools which support writing during RUN
Programming tool PLC Version Remarks
GX Developer
FX
3G
Ver.2.00A or later
Writing in the instruction and device ranges during RUN is
supported in FX
2N PLCs Ver.1.00 or later.
Ver.5.00A or later
Writing in the instruction and device ranges during RUN is
supported in FX
1N PLCs Ver.1.00 or later.
Ver.8.72A or later
Writing in the instruction and device ranges during RUN is
supported in FX
3G PLCs Ver.1.00 or later.
Ver.8.78G or later
Writing in the instruction and device ranges during RUN is
supported in FX
3G PLCs Ver.1.10 or later.
FX
3U/FX3UC
Ver.7.00A or later
Writing in the instruction and device ranges during RUN is
supported in FX
2N PLCs Ver.3.00 or later.
Ver.8.13P or later
Writing in the instruction and device ranges during RUN is
supported in FX
3UC PLCs Ver.1.00 or later.
Ver.8.18U or later
Writing in the instruction and device ranges during RUN is
supported in FX
3UC PLCs Ver.1.30 or later.
Ver.8.23Z or later
Writing in the instruction and device ranges during RUN is
supported in FX
3U and FX3UC PLCs Ver.2.20 or later.
Ver. 8.29F or later
Writing in the instruction and device ranges during RUN is
supported in FX
3U and FX3UC PLCs Ver.2.30 or later
Ver.8.82L or later
Writing in the instruction and device ranges during RUN is
supported in FX
3U and FX3UC PLCs Ver.2.61 or later.
FX-PCS/WIN
FX
3G Ver.1.00 or later
Writing in the instruction and device ranges during RUN is
supported in FX
2 PLCs Ver.3.30 or later.
FX
3U/FX3UC
Ver.2.00 or later
Writing in the instruction and device ranges during RUN is
supported in FX
2N PLCs Ver.1.00 or later.
Ver.4.00A or later
Writing in the instruction and device ranges during RUN is
supported in FX
1N PLCs Ver.1.00 or later.
Ver.4.20 or later
Writing in the instruction and device ranges during RUN is
supported in FX
2N PLCs Ver.3.00 or later.
FX-PCS/WIN-E
FX
3G Ver.3.00 or later
Writing in the instruction and device ranges during RUN is
supported in FX
1N PLCs Ver.1.00 or later.
FX
3U/FX3UC
Ver.1.00 or later
Writing in the instruction and device ranges during RUN is
supported in FX
2 PLCs Ver.3.30 or later.
Ver.1.00 or later
Writing in the instruction and device ranges during RUN is
supported in FX
2N PLCs Ver.1.00 or later.
Ver.3.10 or later
Writing in the instruction and device ranges during RUN is
supported in FX
2N PLCs Ver.3.00 or later.
To Next Page
Loading...
