Mitsubishi Electric MELSEC FX3U - Appendix A-1 Programming Tool Applicability; Appendix A-1-1 Programming Tool Applicability; Appendix A: Programming Tool Applicability and Version Upgrade History

948
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-1 Programming Tool Applicability
Appendix A: Programming Tool Applicability and Version
Upgrade History
Appendix A-1 Programming Tool Applicability
Appendix A-1-1 Programming tool applicability
1. Applicable versions of programming tool
1) GX Developer
GX Developer is applicable to FX
3G, FX3U and FX3UC PLCs starting with the following version:
a) FX
3G PLCs
b) FX
3U PLCs
c) FX
3UC PLCs
*1. For Ver. 8.23Z or 8.24A of GX Developer, the PLC type is FX3UC.
FX3G PLC
version
Model name
(Media model name is
shown below.)
Applicable GX Developer
version
Remarks
Ver.1.00 or later
GX Developer
SWD5C(F)-GPPW-J
SWD5C(F)-GPPW-E
Ver.8.72A or later
• Supports FX
3G PLCs (Ver.1.00 or later).
Model selection: FX3G
Ver.1.10 or later Ver.8.78G or later
• Supports FX
3G PLCs (Ver.1.10 or later).
Model selection: FX3G
FX3U PLC
version
Model name
(Media model name is
shown below.)
Applicable GX Developer
version
Remarks
Ver. 2.20 or later
GX Developer
SWD5C(F)-GPPW-J
SWD5C(F)-GPPW-E
Ver.8.23Z or later
• Supports FX
3U PLCs (Ver.2.20 or later).
Model selection: FX3U(C)
*1
Ver. 2.30 or later Ver.8.29F or later
• Supports FX
3U PLCs (Ver.2.30 or later).
Model selection: FX3U(C)
Ver. 2.61 or later Ver.8.82L or later
• Supports FX
3U PLCs (Ver.2.61 or later).
Model selection: FX3U(C)
FX3UC PLC
version
Model name
(Media model name is
shown below.)
Applicable GX Developer
version
Remarks
Ver.1.00 or later
GX Developer
SWD5C(F)-GPPW-J
SWD5C(F)-GPPW-E
Ver.8.13P or later
• Supports FX
3UC PLCs (Ver.1.00 or later).
Model selection: FX3UC
Ver.1.30 or later Ver.8.18U or later
• Supports FX
3UC PLCs (Ver.1.30 or later).
Model selection: FX3UC
Ver. 2.20 or later Ver.8.23Z or later
• Supports FX
3UC PLCs (Ver.2.20 or later).
Model selection: FX3U(C)
*1
Ver. 2.30 or later Ver.8.29F or later
• Supports FX
3UC PLCs (Ver.2.30 or later).
Model selection: FX3U(C)
Ver. 2.53 or later Ver.8.68W or later
• Supports FX
3UC-32MT-LT-2 PLCs
(Ver.2.53 or later).
Model selection: FX3U(C)
Ver. 2.61 or later Ver.8.82L or later
• Supports FX
3U PLCs (Ver.2.61 or later).
Model selection: FX3U(C)