Mitsubishi Electric MELSEC FX3U - Analog Expansion Boards [M8260 to M8279 and D8260 to D8279]

922
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
37 Operation of Special Devices (M8000 -, D8000 -)
37.2 Supplement of Special Devices (M8000 - and D8000 -)
37.2.18 Analog expansion boards [M8260 to M8279 and D8260 to D8279]
When the analog expansion board is connected, operations and functions are assigned to devices shown in
the table below in accordance with the connection position.
Operations and functions in the table below are shaded for write-prohibited devices.
→ For details, refer to the Analog Control Edition.
1. Special auxiliary relay (M8260 to M8279)
•FX3G PLC
*1. Only a 40-point or 60-point type FX
3G PLC can be connected.
Number
Operation and function
FX3G-2AD-BD FX3G-1DA-BD
Applicable
version
Ver.1.10 or later Ver.1.10 or later
1st analog expansion board
M 8260 Input mode switching Ch1 Output mode switching
M 8261 Input mode switching Ch2
Not used
M 8262
Not used Not used
M 8263
Not used Not used
M 8264
Not used Output hold mode cancel
M 8265
Not used Not used
M 8266
Not used Not used
M 8267
Not used Not used
M 8268
Not used Not used
M 8269
Not used Not used
2nd analog expansion board
*1
M 8270 Input mode switching Ch1 Output mode switching
M 8271 Input mode switching Ch2
Not used
M 8272
Not used Not used
M 8273
Not used Not used
M 8274
Not used Output hold mode cancel
M 8275
Not used Not used
M 8276
Not used Not used
M 8277
Not used Not used
M 8278
Not used Not used
M 8279
Not used Not used