719
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
29 Data Table Operation – FNC250 to FNC269
29.6 FNC261 – BINDA / BIN to Decimal ASCII Conversion
21
FNC160-
FNC169
Real Time Clock
22
FNC170-
FNC179
External Device
23
FNC180
Alternate
Instructions
24
FNC181-
FNC189
Others
25
FNC190-
FNC199
Block Data
26
FNC200-
FNC209
Character String
27
FNC210-
FNC219
Data
28
FNC220-
FNC249
Data
29
FNC250-
FNC269
Data Table
30
FNC270-
FNC274
Ex-Device
Related devices
Related instructions
Cautions
1. Occupied device points
The table below shows the occupied device points of for 16-bit operation(BINDA/BINDAP) when
M8091 is ON/OFF and 32-bit operation (DBINDA/DBINDAP).
Errors
An operation error is caused in the following case; The error flag M8067 turns ON, and the error code is
stored in D8067.
• When the occupied device point of storing the ASCII code character string exceeds the
corresponding device rang (error code: K6706).
Device Name Description
M8091
Output character
quantity selector signal
• For 16-bit operation
- When M8091 is OFF, +3 is set to "0000H (NULL)."
- When M8091 is ON, +3 does not change.
• For 32-bit operation
- When M8091 is OFF, the high-order byte of +5 is set to "00H (NULL)."
- When M8091 is ON, the high-order byte of +5 is set to "20H (space)."
Instruction Description
ASCI(FNC 82) Converts hexadecimal values into ASCII code.
HEX(FNC 83) Converts ASCII code into hexadecimal values.
STR(FNC200) Converts binary data into a character string (ASCII code).
VAL(FNC201) Converts a character string (ASCII code) into binary data.
DABIN(FNC260) Converts numeric data expressed in decimal ASCII code (30H to 39H) into binary data.
Occupied Points of
16-bit operation
M8091=ON 3
M8091=OFF 4
32-bit operation 6
D
D
D
D
D
D
D
To Next Page
Loading...
