Mitsubishi Electric MELSEC FX3U - Page 928

926
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
37 Operation of Special Devices (M8000 -, D8000 -)
37.2 Supplement of Special Devices (M8000 - and D8000 -)
•FX3G PLCs
*1. Only a 40-point or 60-point type FX
3G PLC can be connected.
Number
Operation and function
FX3U-4AD-ADP FX3U-4DA-ADP FX3U-3A-ADP
Applicable
version
Ver.1.00 or later Ver.1.00 or later Ver.1.20 or later
1st analog special adapter
M 8280 Input mode switching Ch1 Output mode switching Ch1 Input mode switching Ch1
M 8281
Input mode switching Ch2 Output mode switching Ch2 Input mode switching Ch2
M 8282
Input mode switching Ch3 Output mode switching Ch3 Output mode switching
M 8283
Input mode switching Ch4 Output mode switching Ch4 Not used
M 8284
Not used Output hold mode cancel Ch1 Not used
M 8285
Not used Output hold mode cancel Ch2 Not used
M 8286
Not used Output hold mode cancel Ch3 Output hold mode cancel
M 8287
Not used Output hold mode cancel Ch4 Sets whether or not input channel 1 is used.
M 8288
Not used Not used Sets whether or not input channel 2 is used.
M 8289
Not used Not used Sets whether or not output channel is used.
2nd analog special adapter
*1
M 8290 Input mode switching Ch1 Output mode switching Ch1 Input mode switching Ch1
M 8291
Input mode switching Ch2 Output mode switching Ch2 Input mode switching Ch2
M 8292
Input mode switching Ch3 Output mode switching Ch3 Output mode switching
M 8293
Input mode switching Ch4 Output mode switching Ch4 Not used
M 8294
Not used Output hold mode cancel Ch1 Not used
M 8295
Not used Output hold mode cancel Ch2 Not used
M 8296
Not used Output hold mode cancel Ch3 Output hold mode cancel
M 8297
Not used Output hold mode cancel Ch4 Sets whether or not input channel 1 is used.
M 8298
Not used Not used Sets whether or not input channel 2 is used.
M 8299
Not used Not used Sets whether or not output channel is used.