942
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
38 Error Check Method and Error Code List
38.4 Error Code List and Action
Syntax error [M8065(D8065)]
0000 ⎯ No error
6501
Stops
operation
Incorrect combination of instruction, device symbol
and device number
During programming, each instruction is checked. If
a syntax error is detected, modify the instruction
correctly.
6502 No OUT T or OUT C before setting value
6503
• No setting value after OUT T or OUT C
• Insufficient number of operands for an applied
instruction
6504
• Same label number is used more than once.
• Same interrupt input or high speed counter
input is used more than once.
6505 Device number is out of allowable range.
6506 Invalid instruction
6507 Invalid label number [P]
6508 Invalid interrupt input [I]
6509 Other error
6510 MC nesting number error
Error
code
PLC operation at
error occurrence
Contents of error Action
To Next Page
Loading...
