2 INPUT AXIS MODULE
2.2 Command Generation Axis
47
2
List of monitor data that can be used
The specifications are the same as for the servo amplifier axis. For the detailed specifications, refer to "MAJOR
POSITIONING CONTROL" in the following manual.
MELSEC iQ-R Motion Module User's Manual (Application for Simple Motion Mode)
: Available, : Not available
■System monitor data
Name Servo amplifier axis Command generation axis
[Md.3] Start information Start history
[Md.4] Start No.
[Md.54] Start (Year: month)
[Md.5] Start (Day: hour)
[Md.6] Start (Minute: second)
[Md.60] Start (ms)
[Md.7] Error judgment
[Md.8] Start history pointer
[Md.19] Number of write accesses to flash ROM : Servo amplifier axis and command generation axis in common
[Md.50] Forced stop input : Servo amplifier axis and command generation axis in common
[Md.59] Module information
[Md.130] F/W version : Servo amplifier axis and command generation axis in common
[Md.131] Digital oscilloscope running flag : Servo amplifier axis and command generation axis in common
[Md.132] Operation cycle setting : Servo amplifier axis and command generation axis in common
[Md.133] Operation cycle over flag : Servo amplifier axis and command generation axis in common
[Md.134] Operation time : Servo amplifier axis and command generation axis in common
[Md.135] Maximum operation time : Servo amplifier axis and command generation axis in common
To Next Page
Loading...
