Mitsubishi Electric Melservo-J5 MR-J5 Series - Regenerative Option; Combination and Regenerative Power

160
6 OPTIONS AND PERIPHERAL EQUIPMENT
6.2 Regenerative option
6.2 Regenerative option
Combination and regenerative power
The power values in the table are resistor-generated powers and not rated powers.
200 V class
*1 Install a cooling fan when using this regenerative option.
*2 Depending on the operating conditions, a cooling fan must be installed.
Page 168 Connection of regenerative option
Servo amplifier Regenerative power [W]
Built-in
regenerative
resistor
MR-
RB032
[40 Ω]
MR-
RB12
[40 Ω]
MR-
RB14
[26 Ω]
MR-
RB30
[13 Ω]
*2
MR-
RB3N
[9 Ω]
*2
MR-
RB31
[6.7 Ω]
*2
MR-
RB34
[26 Ω]
*2
MR-
RB50
[13 Ω]
*1
MR-
RB5N
[9 Ω]
*1
MR-
RB51
[6.7 Ω]
*1
MR-J5-10_  30 
MR-J5-20_ 10 30 100 
MR-J5-40_ 10 30 100 
MR-J5-60_ 10 20 100 
MR-J5-70_ 30 100 300 
MR-J5-100_ 30 100 300 
MR-J5-200_ 100 300 500 
MR-J5-350_ 100 300 500 
MR-J5-500_ 130 300 500
MR-J5-700_ 170 
MR-J5W2-22G_ 20 100 
MR-J5W2-44G_ 20 100 
MR-J5W2-77G_ 100 300 
MR-J5W2-1010G_ 100 300 
MR-J5W3-222G_ 30 100 300 
MR-J5W3-444G_ 30 100 300 